| PART |
Description |
Maker |
| 507-081M100BH |
Accessories Micro-D Backshells Elliptical Entry Emi Backshell
|
Glenair
|
| 507-164M2104FB 507-164J1506FB 507-164E2105EB 507-1 |
EMI/RFI Split Banding Micro-D Backshell Elliptical Entry
|
Glenair, Inc.
|
| 447LS326XM08 447AT326XM08 447FT326XM08 447LT326XM0 |
Composite Standard Profile EMI/RFI Micro-Banding Backshell
|
Glenair, Inc.
|
| 447AS657XW10 |
Composite Low-Profile Micro Band-in-a-Can Backshell with Strain-Relief Clamp
|
Glenair, Inc.
|
| 507-146Z209 507-146NF37 507-146M51 507-146M15 507- |
Micro-D Backshells Strain Relief Backshell, Round Cable Entry 507-146
|
Glenair, Inc.
|
| 43045-1807 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount, Dual Row, Right Angle, with Press-fit Metal Retention Clip, 18 Circuits
|
Molex Electronics Ltd.
|
| 43045-1208 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount, Dual Row, Right Angle, with Press-fit Metal Retention Clip, 12 Circuits
|
Molex Electronics Ltd.
|
| 43045-0807 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount, Dual Row, Right Angle, with Press-fit Metal Retention Clip, 8 Circuits
|
Molex Electronics Ltd.
|
| 43045-2407 0430452407 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount, Dual Row, Right Angle, with Press-fit Metal Retention Clip, 24 Circuits
|
Molex Electronics Ltd.
|
| 43045-1808 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount, Dual Row, Right Angle, with Press-fit Metal Retention Clip, 18 Circuits
|
Molex Electronics Ltd.
|
| 43045-1615 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount, Dual Row, Vertical, with Press-fit Metal Retention Clip, 16 Circuits
|
Molex Electronics Ltd.
|
| 43045-1624 |
3.00mm (.118) Pitch Micro-Fit 3.0 Header, Surface Mount Compatible, Dual Row, Vertical, with Press-fit Metal Retention Clip, 16 Circuits
|
Molex Electronics Ltd.
|
|
